What's actually causing this
Washing machines skip the spin cycle when the load is unbalanced, the lid or door switch isn't registering as closed, the drain pump is clogged (wet clothes can't spin), or the drive belt is worn.
What you'll need
Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.
Step-by-step fix
-
1
Redistribute the load
Open the lid and rearrange the clothes evenly around the drum. Heavy items like jeans or towels clumped together throw off the balance and cause the machine to skip spinning.
-
2
Check the lid or door switch
The machine won't spin if it thinks the lid is open. Press the lid switch plunger manually — you should hear a click. For front-loaders, make sure the door latches fully and the seal isn't obstructed.
-
3
Check if the machine drained
If there's still water in the drum, the spin cycle won't start. Run a drain-only cycle. If it won't drain, see our dishwasher drain guide for drain pump troubleshooting steps.
-
4
Inspect the drive belt
Unplug the machine. Access the back panel or tilt the machine back. Look for a rubber belt around the motor pulley and drum. A broken, loose, or burned belt prevents spinning.
-
5
Check the motor coupling
On direct-drive machines, the motor coupling connects the motor to the transmission. It's designed to break under stress to protect the motor. A broken coupling is a $10–20 part and a common fix.
Appliance technicians in Houston typically charge $45–90/hr for service calls and repairs. Major appliance replacement costs $500–2,000+ per unit.
Standard U.S. sizes. Gas ranges are common. Washer/dryer hookups are universal in single-family homes. Venting is straightforward.
Hard water in Houston (300–380 ppm) accelerates scale buildup in dishwashers, washing machines, and water heaters. Consider a water softener or descaling treatments every 3–6 months. High humidity can promote mold growth in washing machines and dishwashers. Leave doors ajar between cycles and run cleaning cycles monthly.
Appliance costs in Houston are near or below national averages, making replacement a more viable option when repair costs exceed 50% of a new unit.
DIY in Houston: Texas's permissive licensing and DIY culture make Houston one of the most DIY-friendly major metros. Homeowners regularly tackle plumbing, electrical, and HVAC work. Permits are cheap and inspections are straightforward. Hard water management is a common DIY focus.
- The motor runs but the drum doesn't move at all.
- You smell burning rubber during the spin cycle.
- The machine shakes violently even with a balanced load.
- Error codes appear on digital display models.
Let Uncle AI diagnose it first.
Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in Houston.
Start free diagnosis →