What's actually causing this
Door hinges squeak when metal-on-metal friction occurs between the hinge pin and the barrel. This happens when the lubricant dries out, when the pin corrodes, or when the hinge is misaligned.
What you'll need
Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.
Step-by-step fix
-
1
Identify the squeaky hinge
Open and close the door slowly while watching each hinge. The squeaky one will show visible friction or movement.
-
2
Lubricate the hinge
Apply petroleum jelly, WD-40, or olive oil (in a pinch) to the hinge pin and along the barrel. Move the door back and forth to work it in.
-
3
Remove and clean the pin if squeaking persists
Tap the hinge pin upward from the bottom with a nail and hammer to remove it. Clean off rust with steel wool. Apply fresh lubricant before reinserting.
-
4
Replace a bent pin
A bent hinge pin will squeak no matter how much lubricant you use. Buy a matching replacement pin ($1–3) and tap it into place.
-
5
Check hinge screws
Loose hinge screws cause friction in addition to squeaking. Tighten all screws. If a screw hole is stripped, fill it with a wooden toothpick and wood glue before re-driving the screw.
Door and window contractors in Minneapolis typically charge $85–150/hr. Window replacement averages $300–800 per window, while entry doors run $800–2,500 installed.
Permits and inspections requirements vary by Minneapolis. Check with your local building department before starting.
Brick and stone masonry common. Wood siding on older homes. Asphalt shingles perform well; replacement every 18–22 years typical. Freeze-thaw causes expansion cracking. Salt used for winter de-icing corrodes metal fixtures.
Freeze-thaw cycles in Minneapolis stress window seals, weatherstripping, and door frames. Check for drafts annually and replace worn weatherstripping before winter.
DIY in Minneapolis: Minneapolis's moderate licensing and cold-climate focus support some DIY work. Winterization, freeze prevention, and water softener maintenance are common homeowner tasks. Extreme freeze risk makes professional HVAC and plumbing maintenance critical.
- The door frame itself has shifted — this may indicate settling or structural movement.
- Multiple doors in the house squeak simultaneously — humidity expansion may be the cause.
- The door won't close at all — this is a framing issue, not a hinge issue.
Let Uncle AI diagnose it first.
Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in Minneapolis.
Start free diagnosis →