What's actually causing this
Circuit breakers trip when the current drawn exceeds the breaker's rating. This happens from overloading (too many appliances on one circuit), a short circuit (hot wire touches neutral), or a ground fault (hot wire touches ground).
What you'll need
Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.
Step-by-step fix
-
1
Identify which breaker is tripping
Go to the electrical panel. Find the breaker that's in the middle position (neither fully on nor fully off). This is the tripped breaker.
-
2
Turn off devices on that circuit
Unplug or turn off all devices on the affected circuit before resetting. Resetting into an overloaded circuit will just trip it again.
-
3
Reset the breaker
Push the breaker firmly to the OFF position until you hear a click, then push it back to ON. If it trips again immediately, stop — there's a short circuit or ground fault.
-
4
Check for overloading
Count the total wattage of devices on the circuit. A 15-amp circuit handles ~1,800 watts. A 20-amp circuit handles ~2,400 watts. High-draw appliances (microwaves, space heaters) often need their own circuit.
-
5
Use an outlet tester
Plug a circuit tester into outlets on the affected circuit. A wiring fault shows as an abnormal light pattern on the tester. This tells you if a short or ground fault is present before you call an electrician.
Electricians in Philadelphia typically charge $120–195/hr. Service calls and diagnostics typically run $150–400, while full circuit upgrades cost $2,000–5,000+.
Pennsylvania requires licensed electrician. Philadelphia requires permits. Homeowner exemptions very limited.
Knob-and-tube wiring in pre-1950s homes is uninsurable. Many older homes have fuse boxes. Electrical upgrades are common. Aluminum wiring in 1960s-1970s homes.
Philadelphia faces significant severe weather risk — high winds, hail, and potential hurricane/tornado exposure can damage electrical panels, outdoor wiring, and service lines. Whole-house surge protection is strongly recommended.
DIY in Philadelphia: Philadelphia's strict codes, historic preservation, and licensing requirements restrict DIY repairs. Most homeowners hire licensed professionals. Permits are required and inspections are strict.
- The breaker trips immediately after resetting — short circuit or failing breaker.
- You smell burning or see scorch marks on outlets or the panel.
- The breaker feels hot to the touch.
- Multiple breakers trip at the same time — possible main panel issue.
- The home is over 40 years old and has an older panel brand (Federal Pacific, Zinsco).
Let Uncle AI diagnose it first.
Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in Philadelphia.
Start free diagnosis →