What's actually causing this
Dead outlets most commonly result from a tripped GFCI outlet cutting power to downstream outlets on the same circuit, a tripped circuit breaker, or — less commonly — a failed outlet that needs replacement.
What you'll need
Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.
- Outlet circuit tester Shop →
- Replacement GFCI outlet Shop →
- Non-contact voltage tester Shop →
- Flathead and Phillips screwdrivers Shop →
Step-by-step fix
-
1
Check the GFCI outlets first
Find the nearest GFCI outlet in the bathroom, kitchen, garage, or outdoors. Press the RESET button firmly. If it clicks, it was tripped — this may restore power to the dead outlet.
-
2
Check the circuit breaker
Look for a tripped breaker at the panel. Reset it and test the outlet.
-
3
Test the outlet
Plug in a lamp or use an outlet tester to confirm the outlet is getting power. If it has power but still doesn't work, the outlet itself has failed.
-
4
Replace the outlet
Turn off the circuit breaker. Remove the cover plate and unscrew the outlet. Photograph the wire connections. Replace with a new outlet, connecting wires the same way. Black to brass, white to silver, bare to green.
-
5
Restore power and retest
Screw the outlet back in, replace the cover plate, and restore power at the breaker. Test with an outlet tester to confirm correct wiring.
Electricians in Las Vegas typically charge $95–155/hr. Service calls and diagnostics typically run $150–400, while full circuit upgrades cost $2,000–5,000+.
Nevada has minimal licensing. Las Vegas requires permits. Homeowner exemptions available for owner-occupied homes.
Most homes 200 amp service. Modern wiring standard. Intense heat and low humidity reduce mold risk. Dust storms can cause power surges; surge protection wise.
DIY in Las Vegas: Las Vegas is extremely DIY-friendly. Nevada's permissive licensing, cheap permits, and strong DIY culture make it ideal for homeowner repairs. Very hard water management and HVAC maintenance are common DIY focuses. Water softener installation is often DIY.
- You see burn marks, melted plastic, or smell burning from the outlet.
- The outlet sparks when you plug something in.
- Multiple outlets on different circuits are dead simultaneously.
- The home uses aluminum wiring (silver-colored, common in homes built 1965–1973).
Let Uncle AI diagnose it first.
Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in Las Vegas.
Start free diagnosis →