What's actually causing this
Garbage disposals jam when hard items (bones, pits, silverware) get lodged between the impellers and the grinding ring. The motor overheats and trips an internal breaker.
What you'll need
Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.
Step-by-step fix
-
1
Turn off the disposal
Switch off the wall switch and unplug the unit under the sink, or turn off its circuit breaker. Never work on a disposal that could activate.
-
2
Press the reset button
Look for a small red or black button on the underside of the disposal. Press it firmly until you feel a click. This resets the overload protector.
-
3
Unjam the flywheel
Insert a 1/4-inch Allen wrench into the hex socket at the center bottom of the disposal. Work it back and forth until the flywheel turns freely in both directions.
-
4
Remove the obstruction
Use tongs or needle-nose pliers to remove any debris from the opening. Use a flashlight to check for items — never use your hand.
-
5
Test the disposal
Plug it back in, wait 15 minutes for the motor to cool, press reset again, then turn the cold water on before switching the disposal on.
In Orlando, tap water is very hard (220–300 ppm). Orlando's water is very hard, sourced from limestone aquifers. Mineral deposits are severe. Water softeners or filters are very common. Salt intrusion is a growing concern near coast.
Plumbers in Orlando typically charge $100–160/hr. Most homeowners budget $800–2,500 for common repairs like fixture replacement, drain clearing, or valve repairs.
Florida has strict licensing. Plumbing requires state-licensed plumber. Homeowner exemptions very limited.
Majority post-1980s elevated construction. Copper is standard. Very hard water means water heaters fail faster (6–8 years). Sediment buildup is severe. Elevated homes due to flood risk. Storm surge can flood systems.
DIY in Orlando: Orlando's strict Florida licensing, hurricane codes, and hard water conditions restrict DIY repairs. Hire licensed professionals for plumbing, electrical, and HVAC. Very hard water management requires professional knowledge.
- The unit leaks from the bottom — the internal seals have failed.
- It runs but drains slowly — the drain line may be clogged further down.
- It makes a loud grinding or rattling noise even after clearing the jam — a bearing may be damaged.
- The unit is more than 10 years old and has had multiple issues.
Let Uncle AI diagnose it first.
Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in Orlando.
Start free diagnosis →