What's actually causing this
Drain clogs form when debris accumulates in the P-trap or the drain pipe below it. In bathrooms, hair and soap are the main culprits. In kitchens, grease and food particles solidify over time and narrow the pipe.
What you'll need
Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.
- Drain snake / hair clog remover Shop →
- Plunger (cup-style) Shop →
- Baking soda and white vinegar Shop →
- P-trap wrench Shop →
Step-by-step fix
-
1
Try the barbed drain tool first
Insert a plastic hair clog remover into the drain and twist it to grab the clog. Pull it out slowly — most bathroom clogs come out in one motion.
-
2
Plunge the drain
Cover the drain with a cup plunger, ensuring a seal. Plunge vigorously 10–15 times. Run hot water to check flow.
-
3
Baking soda and vinegar flush
Pour half a cup of baking soda down the drain, followed by half a cup of white vinegar. Wait 15 minutes, then flush with boiling water.
-
4
Remove and clean the P-trap
Place a bucket under the curved pipe beneath the sink. Unscrew the slip joints by hand (or with pliers) and pull out the P-trap. Clean it out and reinstall.
-
5
Run water and test
Run hot water for 2 minutes to ensure full flow is restored. Watch for any slow drainage, which may indicate a deeper blockage.
- Multiple drains in the house are slow at the same time — this indicates a main line clog.
- You hear gurgling from other drains when you flush the toilet.
- You smell sewer gas — this is a health hazard requiring immediate attention.
- The drain has been cleaned but keeps re-clogging within days.
Let Uncle AI diagnose it first.
Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in national.
Start free diagnosis →