What's actually causing this

Drain clogs form when debris accumulates in the P-trap or the drain pipe below it. In bathrooms, hair and soap are the main culprits. In kitchens, grease and food particles solidify over time and narrow the pipe.

What you'll need

Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.

Ad Slot — In-Content

Step-by-step fix

  1. 1

    Try the barbed drain tool first

    Insert a plastic hair clog remover into the drain and twist it to grab the clog. Pull it out slowly — most bathroom clogs come out in one motion.

  2. 2

    Plunge the drain

    Cover the drain with a cup plunger, ensuring a seal. Plunge vigorously 10–15 times. Run hot water to check flow.

  3. 3

    Baking soda and vinegar flush

    Pour half a cup of baking soda down the drain, followed by half a cup of white vinegar. Wait 15 minutes, then flush with boiling water.

  4. 4

    Remove and clean the P-trap

    Place a bucket under the curved pipe beneath the sink. Unscrew the slip joints by hand (or with pliers) and pull out the P-trap. Clean it out and reinstall.

  5. 5

    Run water and test

    Run hot water for 2 minutes to ensure full flow is restored. Watch for any slow drainage, which may indicate a deeper blockage.

What this costs in Orlando
DIY (parts only) $5–20
Hiring a local pro $150–400
Cost of doing nothing Pipe corrosion and water damage over time
Plumbing considerations for Orlando homeowners

In Orlando, tap water is very hard (220–300 ppm). Orlando's water is very hard, sourced from limestone aquifers. Mineral deposits are severe. Water softeners or filters are very common. Salt intrusion is a growing concern near coast.

Plumbers in Orlando typically charge $100–160/hr. Most homeowners budget $800–2,500 for common repairs like fixture replacement, drain clearing, or valve repairs.

Florida has strict licensing. Plumbing requires state-licensed plumber. Homeowner exemptions very limited.

Majority post-1980s elevated construction. Copper is standard. Very hard water means water heaters fail faster (6–8 years). Sediment buildup is severe. Elevated homes due to flood risk. Storm surge can flood systems.

DIY in Orlando: Orlando's strict Florida licensing, hurricane codes, and hard water conditions restrict DIY repairs. Hire licensed professionals for plumbing, electrical, and HVAC. Very hard water management requires professional knowledge.

Stop and call a pro if you see this
  • Multiple drains in the house are slow at the same time — this indicates a main line clog.
  • You hear gurgling from other drains when you flush the toilet.
  • You smell sewer gas — this is a health hazard requiring immediate attention.
  • The drain has been cleaned but keeps re-clogging within days.
Not sure what's wrong?

Let Uncle AI diagnose it first.

Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in Orlando.

Start free diagnosis →
Ad Slot — 728×90 Footer Leaderboard