What's actually causing this
Faucets drip when an internal part wears out and can no longer form a watertight seal. Which part depends on your faucet type: ball, cartridge, compression, or ceramic disc.
What you'll need
Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.
- Adjustable wrench Shop →
- Screwdriver set Shop →
- Allen wrench set Shop →
- Replacement cartridge Shop →
- Plumber's grease Shop →
Step-by-step fix
-
1
Turn off the water supply
Look under the sink for two oval shutoff valves. Turn them clockwise until they stop, then open the faucet to drain the line.
-
2
Remove the handle
Pry off the decorative cap on top, remove the screw underneath, and pull the handle straight up.
-
3
Remove the worn part
For cartridge faucets, grip and pull the cartridge straight up. For compression faucets, unscrew the packing nut and replace the rubber washer.
-
4
Install the new part
Match the old part exactly. Apply plumber's grease to O-rings before installing. Ensure cartridge orientation matches the original.
-
5
Reassemble and test
Reverse the disassembly order. Slowly turn the shutoff valves back on. Run the faucet several times and wait 10 minutes before confirming the fix.
- The shutoff valve under the sink won't fully close.
- Water is leaking from the pipe itself, not the faucet.
- You see corrosion or mineral buildup on the pipes.
- It's a shower or bathtub faucet inside the wall.
Let Uncle AI diagnose it first.
Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in national.
Start free diagnosis →