What's actually causing this

Pipes leak at joints when thread sealant dries out, at elbows where water pressure concentrates, or anywhere corrosion has weakened the pipe wall. PVC joints also crack from freezing temperatures or physical impact.

What you'll need

Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.

Ad Slot — In-Content

Step-by-step fix

  1. 1

    Shut off the water supply

    Turn off the main water shutoff valve. Open a faucet downstream to drain remaining pressure from the pipe.

  2. 2

    Dry the pipe completely

    Use a towel and fan to dry the area around the leak. No repair compound bonds to a wet surface.

  3. 3

    Apply a pipe repair clamp (temporary)

    Center the rubber gasket over the leak and tighten the clamp screws evenly. This buys time for a permanent repair.

  4. 4

    Cut out and replace the damaged section (permanent)

    Cut 2 inches on either side of the damaged area using a pipe cutter. Install push-to-connect (SharkBite) couplings on each side for a no-solder permanent fix.

  5. 5

    Test under pressure

    Slowly turn the water back on. Watch the repair area for 10 minutes. Check all connections for moisture.

What this costs in Orlando
DIY (parts only) $10–50
Hiring a local pro $200–600
Cost of doing nothing Mold growth and structural damage within 24–48 hours
Plumbing considerations for Orlando homeowners

In Orlando, tap water is very hard (220–300 ppm). Orlando's water is very hard, sourced from limestone aquifers. Mineral deposits are severe. Water softeners or filters are very common. Salt intrusion is a growing concern near coast.

Plumbers in Orlando typically charge $100–160/hr. Most homeowners budget $800–2,500 for common repairs like fixture replacement, drain clearing, or valve repairs.

Florida has strict licensing. Plumbing requires state-licensed plumber. Homeowner exemptions very limited.

Majority post-1980s elevated construction. Copper is standard. Very hard water means water heaters fail faster (6–8 years). Sediment buildup is severe. Elevated homes due to flood risk. Storm surge can flood systems.

DIY in Orlando: Orlando's strict Florida licensing, hurricane codes, and hard water conditions restrict DIY repairs. Hire licensed professionals for plumbing, electrical, and HVAC. Very hard water management requires professional knowledge.

Stop and call a pro if you see this
  • The leak is inside a wall or ceiling — accessing it requires opening drywall.
  • The pipe is corroded or crumbling — a section repair won't solve systemic corrosion.
  • You can hear running water but can't locate the source.
  • The pipe is part of a gas line — never attempt gas line repairs yourself.
Not sure what's wrong?

Let Uncle AI diagnose it first.

Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in Orlando.

Start free diagnosis →
Ad Slot — 728×90 Footer Leaderboard