What's actually causing this

Exterior paint peels when moisture gets beneath the paint film. This happens from inadequate caulking around windows and trim, missing or blocked soffit vents (causing interior moisture to push outward), or applying new paint over a dirty or glossy surface.

What you'll need

Links go to Amazon search results — buy the part that matches your specific model. Uncle AI earns a small commission on purchases, at no extra cost to you.

Ad Slot — In-Content

Step-by-step fix

  1. 1

    Address the moisture source first

    Check caulking around windows, doors, and trim. Ensure gutters are directing water away from the wall. Check that soffit vents are clear.

  2. 2

    Scrape all loose paint

    Use a paint scraper to remove all peeling paint. Don't just paint over loose areas — the new paint will peel within months.

  3. 3

    Clean the surface

    Wash the entire area with a pressure washer or scrub with a trisodium phosphate (TSP) solution. Let dry fully — at least 24 hours.

  4. 4

    Sand and feather edges

    Sand the edges of the scraped areas with 80-grit sandpaper to eliminate hard lines. Smooth bare wood with the direction of the grain.

  5. 5

    Prime and paint

    Apply an oil-based or stain-blocking exterior primer to all bare wood. Let cure per the product spec (usually 24 hours). Apply two coats of exterior paint.

What this costs in Austin
DIY (parts only) $50–200
Hiring a local pro $500–3,000
Cost of doing nothing Wood rot and structural damage from moisture intrusion
Roofing and exterior maintenance in Austin

Roofing and siding contractors in Austin typically charge $75–135/hr. Roof replacement averages $6,000–15,000, while siding replacement runs $8,000–25,000+ depending on material and home size.

Roofing and exterior work typically requires Austin permits and inspections. Get quotes from at least two licensed contractors.

Stucco and vinyl siding common. Asphalt shingle roofs need replacement every 15–18 years. Austin's growth means new construction standards are modern. Outdoor living spaces (patios) are common and require maintenance.

UV radiation in Austin is among the highest in the U.S. — roof shingles, paint, and exterior sealants degrade faster than national averages. Expect 15–20% shorter roof lifespans.

DIY in Austin: Austin is very DIY-friendly. Texas's permissive licensing, affordable permits, and tech-savvy population support homeowner repairs. Hard water management is a common DIY focus. HVAC maintenance is often DIY-handled.

Stop and call a pro if you see this
  • Peeling covers more than 30% of the surface — full repaint is needed.
  • You find rotted wood beneath the paint.
  • Lead paint is suspected — home was built before 1978 (test before sanding).
  • The surface is above the second story.
Not sure what's wrong?

Let Uncle AI diagnose it first.

Describe the problem. Uncle AI asks the right questions and tells you exactly what's broken — and whether you should fix it yourself or call someone in Austin.

Start free diagnosis →
Ad Slot — 728×90 Footer Leaderboard